Konica Minolta bizhub C20 Reference Manual page 144

Symptom
When printing 2 pages on a
single sheet of paper, the
pages are not centered on
the paper.
When printing multiple cop-
ies of multiple pages on a
single sheet of paper with
Collated selected, the
pages are printed continu-
ously.
While printing from Acrobat
Reader, the pages are not
correctly collated or the
print job is cancelled.
When using Mac OS X
10.5/10.6, constraint pro-
cessing is not applied dur-
ing printing if certain
settings have been speci-
fied.
When Mac OS X 10.4 is
used to send a job with a
custom paper size that has
a width of 21.6 cm, Let-
ter-size paper is requested.
The output begins on the
first page when the paper is
removed after
TRAY FULL REMOVE
PAPER
printing a large amount of
page.
120
OUTPUT
is displayed while
Solution
Depending on the operating system, the
pages are not centered on the paper when
printing two pages on a single sheet of paper
with the following paper sizes.
Legal, Letter Plus, Foolscap, Government
Legal, Statement, Folio
When printing multiple copies of multiple
pages on a single sheet of paper, Collated
cannot be selected.
If a printing error occurs with Acrobat Reader,
print using the preview feature provided by
the operating system.
This is a limitation of the operating system.
Check the Apple database.
Change the width of the custom paper size to
21.59 cm, and then try sending the job again.
There is a limitation of the operating system.
Removing the paper of output tray before the
error message displays, avoids this problem.
Troubleshooting