Konica Minolta bizhub C20 Reference Manual page 389

The System - Status Notification Settings window allows you to configure
the following items:
Item
IP Address
IPX Address
Email Address
Configuring the Printer
Description
Notification Specify the IP address of the SNMP trap
Address receiver. An IPv4 or IPv6 address or a
host name can be specified.
Range: Up to 63 characters
Default: 0.0.0.0
Port Num- Specify the port number of the SNMP
ber(1-65535) trap.
Range: 1 - 65535
Default: 162
Community Specify the community name for the
Name SNMP trap.
Range: Up to 15 characters
Default: public
Notification Specify the IPX address of the SNMP trap
Address receiver.
Range: 8 characters
Default: 00000000
Node Address Specify the node address of the SNMP
trap receiver.
Range: 12 characters
Default: 000000000000
Community Specify the community name for the
Name SNMP trap.
Range: Up to 15 characters
Default: public
Email Notice Specifies whether or not a notification is
sent by e-mail when a warning occurs in
the printer.
Choices: Enable, Disable
Default: Enable
Notification Specifies the e-mail address where the
Address notification is sent.
Range: Up to 320 characters
Default: [Blank]
365