Network Setup; Sd Card Setup - Panasonic PT-L750U R Operating Instructions Manual

This feature will not function under
the following situation.
1) When the NETWORK or SD
CARD is selected (PT-L780NTU
only).
2) When using the freeze function.
3) When writing the data in the SD
memory card (PT-L780NTU
only).

NETWORK SETUP

You need make adjustment on some items when controlling the projector
with a personal computer by means of the wireless or wired network, using
an optional wireless card or projector LAN card. Refer to the accessory CD-
ROM for details.
調整：［←］［→］

SD CARD SETUP

The following settings are used when projecting the pictures recorded in the
SD memory card. Refer to the accessory CD-ROM for details.
NOTE:
While projector is connected to a
personal computer by means of a
wireless or wired network using an
optional wireless card or projector
LAN card with the WEB STANDBY
set to "ON", the cooling fan operates
and the power indicator on the
projector flashes slowly in red.
(Refer to page 47)
(PT-L780NTU only)
STATUS
This setting is used to adjust the
LAN to control the projector by
means of the wireless or wired
network.
WEP
This setting is for encrypting data
transmitted by means of the
wireless network. (This item will not
be displayed when an optional
projector LAN card is used.)
(PT-L780NTU only)
AUTO PLAY
Plays the pictures recorded in the
SD memory card automatically.
REPEAT
This setting is for adjusting the
times of the auto play.
INTERVAL
This setting is adjusting the interval
of the auto play.
49