Network Setting; Example Of Setting For Use Of The Wireless Card; To Use Wireless Communication For The First Time - Panasonic PT-L750U R Operating Instructions Manual

Network setting

Example of setting for use of the
wireless card
Image transfer methods that use wireless card are broadly classified into four types
depending on the current working environment.

To use wireless communication for the first time

Insert the optional wireless card (ET-CDWL1) into your PC and make setting for the
direct wireless communication with the projector.
For details of setting the projector, refer to "Setting the projector" on page 104.
For details of setting the PC, refer to "Settings of personal computer" on page 112.
Personal computer
Typical setting
Parameters
IP address
Subnet mask
Mode
Channel
Note:
• It is also necessary to install the wireless card driver and to make settings for the
wireless card.
For details of installing the wireless card driver, refer to "Installing wireless card
driver" on page 107.
For details of setting the wireless card, refer to "Settings of wireless card" on page
111.
Setting of the projector
LAN 1 - 5:
192.168.10.10-14
(factory default)
If you use more than one
projector, assign a different
address to each of them.
255.255.255.0
(factory default)
AD HOC
11 (factory default)
Use the same setting as the
PC.
R
Projector
Setting of the PC
Assign an address such as
192.168.10.15 or 192.168.10.20.
The same IP address as the
projector cannot be used.
255.255.255.0
Ad Hoc
11
Use the same setting as the
projector.
99