Adjusting The Position - Panasonic PT-L750U R Operating Instructions Manual

Adjusting the position

When the input signal is RGB, first
press the AUTO SETUP button to
initiate automatic positioning.
If the optimum setting is not
obtained when AUTO SETUP is
carried out, adjust by the following
procedure.
Select the item pressing the F or G
buttons on the remote control unit or
the projector.
Press the I or H buttons, to adjust
the alternative items. For the
numerically adjustable items, press
the ENTER button to display an
individual screen, and press the I
or H buttons to adjust the setting.
Some items can be adjusted
pressing the F or G buttons.
When an RGB/DVI signal is being
input
"POSITION", "DOT CLOCK" and
"CLOCK PHASE" are not displayed
when a DVI signal is being input.
When an S-VIDEO/VIDEO signal is
being input
When a YP P signal is being input.
B R
When the NETWORK/SD CARD is
selected (PT-L780NTU only)
41