Creating your layout
Connecting your wall-pack power supply
Y
our trains are powered by a DC wall-pack power supply. To power the track, simply plug
the wall-pack into an outlet and plug the jack into the terminal section as shown in
Figure 4.
Jack on wall-pack
power supply
Figure 4. Wall-pack power supply connection
Running your train set
With track power unplugged, place your train set on the track.
1
Refer to the following section for information on coupling the cars.
Plug in your wall-pack power supply, connect
2
it to the track, and switch on the remote.
Move 'em out!
3
Use your remote to run your train. You can adjust the
speed in forward or reverse, blow the whistle, sound the bell, or
trigger an announcement. Refer to page 7 for complete details.
Unplug the wall-pack power supply when you are done
4
running your trains.
Switch off your remote control to conserve the batteries.
10