Table of Contents
Advertisement
- - - - Thumbnail buttons
Lets you change the number
of images that can be
displayed in the Image List
box.
. . . . The next image is selected
automatically
If this is selected, the selected
image is sent to the projector
when the SEND button is
clicked, and then the next
image in the image list is
selected and appears in the
preview window. Furthermore, the image in the preview window is
stored in the projector's memory. The Wireless Manager functions
cannot be used while an image is being stored by the projector in this
way.
/ / / / "CLOSE" button
Closes the "Image List" window.
Auto Play
0 0 0 0 "AUTO PLAY" button
If you click the "AUTO Play" button, the images displayed in the Image
List box are changed and transmitted to the projector automatically in
the order they appear after a certain interval of time. This interval can
be set using the "$ Interval" setting on page 49.
1 1 1 1 Pause button
If you click the pause button during Auto Play, playback is momentarily
paused. If you click the pause button again, playback resumes.
2 2 2 2 Stop button
If you click the stop button during Auto Play, Auto Play stops.
Basic operations
# # # # Use the G G G G button and the Folder
Selection box to select the folder
containing the existing image files.
$ $ $ $ Select the images to be projected in
the Image List box and then click
"SEND".
The selected images will be sent to the
projector and projected.
-48-
Advertisement
Table of Contents
