How To Change The Hinging Of The Solid Door - Porkka F Technical And Service Manual

Technical and Service manual
Inventus upright refrigerators and freezers

How to change the hinging of the solid door

You will need a straight ball head allen key (4 mm), a sharp flat screw driver, a sheat-knife and a
hammer.
Porkka reserves the right to make product alterations at any time and can not be held responsible for any printing errors or omissions.
Not proof read yet!
1. Open the door over 90 °C and carefully remove the
black sealing plugs on the other side with your
knife.
2. Loosen the two hex screws in the upper hinge,
supporting the door with your foot
3. Lift the door off the lower hinge. Do not change
the angle.
26