Using An Assigned Function; Projecting 2 Different Source Image At A Time - Panasonic PT-FW300E Operating Instructions Manual

Remote control operation

Using an assigned function

You can assign a selected function to the FUNCTION button. Following functions are assignable.
Options
Deactivate the FUNCTION
DISABLE
button.
ASPECT Display the ASPECT menu.
Display the PICTURE MODE
PICTURE MODE
menu.
Display the DAYLIGHT VIEW
DAYLIGHT VIEW
menu.

Projecting 2 different source image at a time

You can project the image and another
source of image at the same time in double
window style. Press any button of RETURN,
MENU, SIDE BY SIDE or INPUT SELECT
buttons to return to the normal projection
style.
COMPUTER1
FG
DVI
FG
NETWORK
Side by Side function signal combination table
Still
COMPUTER1
Movie
Still
COMPUTER2
Movie
VIDEO IN
S-VIDEO IN
Still
DVI-D
Movie
NETWORK connection
NOTE:
• FREEZE and VOLUME controls are available with the first image only.
• While SIDE BY SIDE is activated, DIGITAL ZOOM, INDEX-WINDOW and AUTO SETUP are not available.
• While SIDE BY SIDE is activated, the main menu will not be displayed.
• The second image will apply to the value of the PICTURE settings of the first image except CONTRAST and
BRIGHTNESS.
• COMPUTER and NETWORK signals will not keep the adjusted aspect ratio.
E
NGLISH - 30
Functions Refer
-
38
35
36
COMPUTER2
IH
FG
S-VIDEO
FG
VIDEO
IH
COMPUTER1 COMPUTER2
Still Movie Still
N/A N/A OK
N/A N/A OK
OK OK N/A
OK N/A N/A
OK N/A OK
OK N/A OK
OK OK OK
OK N/A OK
OK OK OK
NOTE:
• See "FUNCTION BUTTON" on page 44.
Switching the signal
In default, the first image is displayed on the left
and the second image is displayed on the right.
You can switch and cycle through the signals of the
second image by pressing F G
Image 1
Image 1
VIDEO IN S-VIDEO IN
Movie
OK OK OK
N/A N/A N/A
N/A OK OK
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
OK OK OK
N/A N/A N/A
OK OK OK
Image 1
Image 2
DVI-D
NETWORK
connection
Still Movie
OK OK OK
OK N/A OK
OK OK OK
OK N/A OK
OK N/A OK
OK N/A OK
N/A N/A OK
N/A N/A OK
OK OK N/A