Using An Assigned Function; Using The Laser Pointer - Panasonic PT-F300NTU Operating Instructions Manual

Remote control operation

Using an assigned function

You can assign a selected function to the FUNCTION button. Following functions are assignable.
Options
Deactivate the FUNCTION
DISABLE
button.
ASPECT Display the ASPECT menu.
Display the PICTURE MODE
PICTURE MODE
menu.
Display the DAYLIGHT VIEW
DAYLIGHT VIEW
menu.
Press to turn on/off the
CLOSED CAPTION
CLOSED CAPTION.

Using the laser pointer

You can highlight items on the screen with
the red laser pointer while projecting the
image in presentations or visual
demonstrations as an eye-catching pointing
device.
Hold down the LASER button to go on the
laser pointer and release to go off.
Disable the LASER button
You can disable the LASER button for an
accidental operation.
1. Open the battery compartment cover of the remote
control.
2. Slide the switch tab.
3. Close the battery compartment cover of the remote
control.
See "Battery compartment" on page 14.
NOTE:
• If you press the disabled LASER button, the alert
"LASER POINTER IS DISABLED." will be displayed on
the screen. While the menu is displaying, the alert will
not be displayed.
NOTE:
• The laser pointer should never be projected directly into the eyes of a person or animal.
• Do not aim the laser at reflective surfaces.
• Do not allow children to use laser pointer.
• Never look directly into the laser beam.
• The laser pointer is not effective with translucent screens.
• Please read the cautions on the remote control.
• This is a Class 2 laser product.
E
NGLISH - 28
Functions Refer
-
36
33
34
34
NOTE:
• See "FUNCTION BUTTON" on page 42.
Top view
Laser pointer beam emitter
Cautions
(Shown as PT-F300NTU)
CAUTION: Use of controls of adjustments or performance
of procedures other than those specified herein may result in
hazardous radiation exposure.
Deactivating switch
On
Off