Capturing An Image; Stopping The Projection; Resetting To The Factory Default Settings; Projecting An Image In Index-Window Mode - Panasonic PT-FW300E Operating Instructions Manual

Capturing an image

Press the FREEZE button to capture the image
and stop the audio, and you can see it as a still
picture while the AV equipment are continuing.

Stopping the projection

You can stop the projection and audio sound
through the projector for saving electrical

Resetting to the factory default settings

You can reset most of the customised settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items, and
press the DEFAULT button again.
See "Main menu and Sub-menu" on page 32.

Projecting an image in INDEX-WINDOW mode

You can project an image in split 2 windows as an INDEX-WINDOW, one is frozen, stored in memory and
displayed on the screen's left side, while the display of subsequent images continues on the right.
To escape from the INDEX-WINDOW, press the MENU
or RETURN button.
Projected image
Switching the position
In default, the frozen image is displayed on the left
and the subsequent image is displayed on the
right. Press I H to switch the position.
Frozen image Continuing image
Continuing image
Frozen image
Continuing image
Frozen image
Remote control operation
Press the FREEZE button again to escape and return to
the continuing image.
power. Press the AV MUTE button again to escape.
NOTE:
• Some menu items are not available to reset by pressing
the DEFAULT button. Adjust each menu items
manually.
• To reset all the settings to the factory defaults, see
"INITIAL START UP" on page 43.
Changing the image size
Press F G to capture a new image and change
the size in 2 ways.
Continuing image
Frozen image
NOTE:
• If you change the window size, the aspect ratio of the
image is changed and becomes vertically elongated.
• When vertically enlarged, some signals image with
THROUGH aspect ratio setting will not be displayed
correctly.
Capturing a new image
While in INDEX-WINDOW mode, press the
ENTER button to capture a new image and the
frozen image window will be updated in a while.
NOTE:
• When capturing a quick moving picture, perform
several times to get a stabled image.
E
NGLISH - 29