Menu Lock; Menu Lock Password; Control Device Setup - Panasonic PT-FW300E Operating Instructions Manual

MENU LOCK

You can lock the MENU button function and the
password will be asked to display the menu every time.
OFF Deactivate the MENU LOCK system.
ON Activate the MENU LOCK system.
NOTE:
• The factory default password is "AAAA".
• The factory default password is valid until you change
the password in MENU LOCK PASSWORD menu.
• When the projector is initialised, the password will be
changed to the factory default setting, "AAAA".

MENU LOCK PASSWORD

You can change the password for MENU LOCK system
to your original.
1. Press the ENTER button.
2. Enter the original password.
Use F G I H to specify the location of the required
character, and press the ENTER button.
MENU LOCK PASSWORD
OK
3. Repeat step 2 until you finish the text line.
You can enter up to 16 characters.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with the cursor in the text line.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press G then perform step 2.
4. Select OK and press the ENTER button to set the
password.
NOTE:
• If you need to restore the factory default password,
contact to an Authorised Service Centre.
ALL DELETE
SPACE
CANCEL

CONTROL DEVICE SETUP

NOTE:
• If you disable both of the control panel and remote
control buttons, you cannot return to the standby mode.
Use this function with utmost care.
• If you press a disabled button, you will be asked to
perform the security password operation. The
password screen will disappear after 10 seconds
without any operation.
CONTROL PANEL
You can disable the control panel buttons on the
projector body. Press I or H to switch the option.
ENABLE Enable the control panel buttons.
DISABLE Disable the control panel buttons.
The confirmation screen will be
displayed. Select OK by pressing the
I, and the ENTER button.
NOTE:
• You can enable the disabled control panel buttons by
performing the control panel button operation. While
pressing the ENTER button, press the MENU button for
2 seconds.
REMOTE CONTROLLER
You can disable the remote control buttons. Press
I or H to switch the option.
ENABLE Enable the remote control buttons.
DISABLE Disable the remote control buttons.
The confirmation screen will be
displayed. Select OK by pressing the
I, and the ENTER button.
SECURITY menu
E
NGLISH - 47