Sub Menu; Switching The Input Signal; Using The Assigned Function As A Shortcut - Panasonic PT-AE4000U Functional Instructions

SUB MENU

You can command the connected equipment to display their sub menu.
It is used with the Link function (VIERA Link).

Switching the input signal

You can switch the input method manually
by pressing the INPUT SELECT button.
Press the button several times or press
▲ ▼ ◄ ► to cycle through the input
methods as follows. The actual projected
image will be changed in a while.
The graphical guidance will be displayed on the upper
right of the projected image and you can confirm the
selected input method which is highlighted in yellow. See
"INPUT GUIDE" on page 39.
COMPONENT IN
COMPUTER IN
HDMI 3 IN
HDMI 2 IN

Using the assigned function as a shortcut

You can access the assigned function in FUNCTION BUTTON menu as a shortcut. See "FUNCTION
BUTTON" on page 38.
COLOR MANAGEMENT
GAMMA ADJUSTMENT
SPLIT ADJUST
WAVEFORM AUTO ADJUST
FRAME CREATION
NORMAL
DYNAMIC
COLOR1
COLOR2
CINEMA1
CINEMA2
CINEMA3
TEST PATTERN
COMPONENT IN
S-VIDEO IN
COMPUTER IN
VIDEO IN
NOTE:
•
HDMI 1 IN
•
•
page 27 OPERATE OTHER DEVICE
page 23 ASPECT
page 22 AUTO SETUP
page 21 CONTRAST
page 26 BRIGHTNESS
BLANK
HDMI 1 IN
HDMI 2 IN
page 20 HDMI 3 IN
COMPUTER IN
COMPONENT IN
S-VIDEO IN
page 41 VIDEO IN
Remote control operation
COMPONENT (YP
from the equipment connected to
COMPONENT IN.
S-VIDEO signal from the equipment
S-VIDEO IN
connected to S-VIDEO IN.
VIDEO signal from the equipment
VIDEO IN
connected to VIDEO IN.
HDMI 1 IN
HDMI signal from the equipment
HDMI 2 IN connected to HDMI IN 1/HDMI IN 2/
HDMI IN 3.
HDMI 3 IN
RGB/YP
B
equipment connected to
COMPUTER IN.
If you select an unplugged input method, the guidance
will blink on and off.
See "List of compatible signals" in "Technical
Information" of the operating instructions.
See "Connections" on page
P ) signals
B R
P
signal from the
R
8.
Booklet
page 32
page 34
page 20
page 38
page 15
E
NGLISH - 15