Panasonic PT-FW300E Operating Instructions Manual page 20

Setting up
Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities. See
"Positioning the image" on page 26.
When the screen position is fixed
When the projector position is fixed
NOTE:
• When the projector is located right in front of the screen and the lens shift lever is centred, you will get the best quality of
the projection image.
• When the lens shift lever is at the vertical limit of the shift range, you cannot move the lever to the horizontal limit, likewise
when the lens shift lever is at the horizontal limit of the shift range, you cannot move the lever to the vertical limit.
• When the projector is tilted and you adjust KEYSTONE, the centre of the screen and the lens need to be realigned.
• Do not attempt to pull the lens shift lever hard while adjusting.
E
NGLISH - 20
Projector
V
Vertical centre of
screen
SH
Screen
SW
51%
51%
24%
H
Placement
Centre of lens
24%
Projector
Shift range