Panasonic KX-TGF380AZ Operating Instructions Manual page 51

Note for handset and base unit:
R If the entry has already been viewed or
answered, " " is displayed.
R or indicates the caller information was
received from the mobile line.
Storing an area code to be deleted
automatically (for landline call)
In some situations, phone numbers stored
automatically in the caller list (page 50) will include
area codes. If you do not want to dial the area
code when making landline calls from the caller
list, you can store the area code which you want
the unit to delete automatically.
Example: You have stored the area code "09". If
you make a landline call from the caller list to the
phone number "09-456-7890", the unit dials
"456-7890".
Handset
1
MMENUN#255
2
Enter an area code (5 digits max.). a
MSAVEN a MOFFN
Note:
R This feature does not affect a voicemail access
number with an area code (page 65).
Note for New Zealand:
R The use of this feature can prevent a National
Call from being dialled. E.g., in the case of the
South Island, the "03" will be omitted and will
therefore prevent a National Call to other areas
of the South Island.
To erase your area code
Handset
1
MMENUN#255
2
Press and hold MCLEARN until all digits
erased. a MSAVEN a MOFFN
Editing a caller's phone number
The caller's telephone number, which is sent to
your telephone from your local telephone
exchange, includes "0" and an area code prefix.
For local calls, "0" and the area code prefix can be
omitted. (for New Zealand)
Handset
n When a mobile phone is paired:
1
MCN CID
2
MbN: Select the desired entry. a MSELECTN
3
Add or erase digits to the beginning of the
number as necessary.
R To add a digit, press the desired dial key.
R To erase a digit, press MCLEARN.
4
Using a mobile line:
To make a mobile call, continue from step 4,
"Viewing the caller list and calling back",
page 50.
Using a landline:
M N
n When a mobile phone is not paired:
1
MCN CID
2
MbN: Select the desired entry. a MMENUN
3
MbN: "Edit" a MSELECTN
4
Add or erase digits to the beginning of the
number as necessary.
R To add a digit, press the desired dial key.
R To erase a digit, press MCLEARN.
5
M N
Base unit
1
MCIDN
2
MbN: Select the desired entry.
3
MEDITN a Add or erase digits to the
beginning of the number as necessary.
R To add a digit, press the desired dial key.
R To erase a digit, press MCLEARN.
4
Using a mobile line:
Press MMOBILE 1N or MMOBILE 2N, then lift
the corded handset.
Using a landline:
Lift the corded handset.
Note for handset and base unit:
R The edited phone number is not saved in the
caller list.
Erasing selected caller information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
Caller ID Service
51