Panasonic KX-TGF380AZ Operating Instructions Manual page 10

Getting Started
R Confirm correct polarities (
R Follow the directions on the display to set up
the unit.
Handset battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged, "Fully
charged" is displayed.
Handset battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(supplied batteries)
Operation
In continuous use
Not in use (standby)
10
, ).
1
).
1
1
Operating time
*1
13 hours max.
*1
12 days max.
*1 If eco mode is on.
Note:
R Actual battery performance depends on usage
and ambient environment.
Base unit battery installation (for
power backup)
You can insert 2 AAA (R03) batteries (not
supplied) into the base unit that will power the unit
temporarily in the event of a power failure.
Important:
R The following batteries can be used with the
base unit:
– Rechargeable Ni-MH batteries
the batteries used in your handset(s))
– Standard (non-rechargeable) alkaline
*3
batteries
R Do NOT use manganese batteries.
R Confirm correct polarities (
*1 The base unit can fully charge Ni-MH batteries
in about 15 hours.
*2 We recommend using HHR-4DPA batteries
(page 4).
*3 Only insert alkaline batteries once a power
failure occurs. Remove the alkaline batteries
when power is restored.
1
Disconnect the telephone line cord (A).
2
Open the battery cover (B).
3
Install the batteries in the battery compartment
(C).
*1, *2
(including
, ).