Caller List - Panasonic KX-TGF380AZ Operating Instructions Manual

Caller ID Service
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your phone service
provider. This feature allows you to receive calls
while you are already talking on the phone. If you
receive a call while on the phone, you will hear a
call waiting tone. If you subscribe to both Caller
ID and Call Waiting with Caller ID services, the
2nd caller's information is displayed on the base
unit or handset that is in use after you hear the call
waiting tone.
Handset / Base unit
1
Press MCALL WAITN to answer the 2nd call.
2
To switch between calls, press MCALL WAITN.
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
Talking Caller ID
Handset / Base unit
This feature lets you know who is calling without
looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your phone
service provider.
– turn this feature on (page 41).
When caller information is received, the handsets
and/or base unit announce the caller's name or
phone number received from your phone service
provider following every ring.
R Name pronunciation may vary. This feature may
not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller's name
is too long, the unit may not be able to display or
announce the entire name.
Phonebook name announcement
When caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is announced.
50

Caller list

Important:
R Make sure the unit's date and time setting is
correct (page 15).
Viewing the caller list and calling back
n Using a mobile line
Handset
1
MCN CID
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
To call back, press MSELECTN.
To exit, press MOFFN.
4
MMOBILEN
R The unit starts dialling when:
– only 1 mobile phone is paired.
– a specific line is set to make mobile calls
(page 19).
5
MbN: Select the desired mobile phone. a
MSELECTN
Base unit
1
MCIDN
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
To call back, press MMOBILE 1N or MMOBILE
2N, then lift the corded handset.
To exit, press MEXITN.
n Using a landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press M
– To exit, press MOFFN.
Base unit:
– To call back, lift the corded handset.
– To exit, press MEXITN.
N.