ray VISION User Manual page 48

RAY User Guide
Note
You can activate the underlying function of each digit on the dialer by saying
the words "RAY <command>". The following are the additional functions
provided on the Dialer keypad:
• Previous: Returns to the previous screen and leaves the Dialer. This is
under the digit 1.
• Read: Reads out the entire number that you entered. This is under the
digit 2.
• Dial: Dials the number that you entered. This is under the digit 6.
• Delete Number: Clears the entire number that you entered. This is
under the digit 7.
• Delete Last Digit: Erases the last digit of the number that you entered.
This is under the digit 8.
For example, say "RAY Delete Number" to clear the entire number that
you entered.
Note
If you opened the Dialer and then accidently ended speech recognition mode
by touching the keypad, you can reactivate speech recognition mode by
moving your finger to the number 0 and holding it there for a moment.
48
Using RAY