Making A Call - ray VISION User Manual

RAY User Guide
RAY is especially designed for non-sighted users and therefore its interface
works differently than a regular Touch-Screen Based, Smartphone device.
The most important thing to learn about RAY is that basic operation is done by
putting your finger somewhere in the center of the screen, then slide your
finger on the screen in the direction of the option that you want to select.
RAY then says the name of an option. After hearing the desired option, lift
your finger to select and execute that option.
You do not select things by tapping an icon.

Making a Call

In order to familiarize you with RAY's special interface, the following guides you
through making your first phone call to someone in your Contacts List. For this
purpose, RAY is provided with a single contact person already defined in the
Contacts List. For example, the phone number of a directory service or the Library
for the Blind.
Note
To answer an incoming call, short press the ON/OFF button.
Note
RAY also provides a speed dial option, which is described in the
Dialing
create Contacts.
To mak To make e e e a phone call from the Contacts L
To mak To mak
►
1 Go to the Home Menu. You can tell whether you are already on the Home
Menu by touching the screen and holding your finger on it for three seconds
until RAY says Home Menu.
Tip
If you are not sure where you are on the RAY device, then simply press and
hold your finger on its screen (somewhere near the center) for three
seconds. The Ray device then says the name of the screen you are in.
Tip
A quick way back to the Home Menu is to:
1 On RAY N5 device, long press the ON/OFF
Menu. The HOME screen option is located at key number 4 on the left.
2 On L5 and E5 devices, this function is available in the standard HOME
section on page 41. You will be able to use this option after you
a phone call from the Contacts List:
a phone call from the Contacts L a phone call from the Contacts L
ist:
ist: ist:
button. RAY says Power
15
Getting Started with RAY
Speed