Table of Contents
Advertisement
RAY User Guide
Figure 11: RAY Menu
T T T T o use a
o use a RAY
o use a
o use a
►
1
Touch anywhere on the screen. You will feel RAY vibrate slightly and a tone
sounds.
Wherever you touch the screen becomes the middle of the Menu for selection
purposes.
You do not have to touch the screen precisely in the middle.
Somewhere near the middle is good enough! Anyway, touching too close
to the sides of the screen is ignored.
2
Imagine the place you touched the screen is the number 5 on a regular 12-
digit numeric keyboard. Clockwise round the area where you placed your
finger (which becomes the number 5), there are 8 numbers starting from 1 on
the upper left corner, 2 in the upwards direction, 3, 6, 9, 8, 7 and 4.
3
Slide your finger a little on the screen in any of the 8 directions. Each direction
represents a RAY function. RAY reads out the name of the service according to
the direction of your finger movement.
4
To select the function that RAY reads out, simply lift your finger. RAY then tells
you the name of the function that is open so that you know what to do next.
If you slide your finger too much and go off the screen, you will hear a
cancellation sound and the current operation is cancelled.
RAY Menu
RAY
RAY
Menu: : : :
Menu
Menu
29
RAY Interface Basics
Advertisement
Table of Contents
