Turning Ray Off; Sleep Mode; Powering Off Ray - ray VISION User Manual

RAY User Guide

Turning RAY Off

RAY can be powered down completely or it can be in Sleep mode. Sleep mode
saves battery while retaining RAY's connection to the cellular and/or Wi-Fi
network.
When RAY is completely powered down, it takes a few seconds longer to power
back on than when it is in Sleep mode.

Sleep Mode

Sleep Mode
Sleep Mode Sleep Mode
RAY automatically goes to sleep mode after it is not used for a while. The following
also puts RAY in Sleep mode.
To go to Sleep mode: To go to Sleep mode: To go to Sleep mode: To go to Sleep mode:
►
1 Short press the ON/OFF button shown in Error! Reference source not
found..
2 You can power RAY back up by pressing the ON/OFF button. RAY then opens
the previously displayed screen.
P P P P owering Off RAY owering Off RAY owering Off RAY owering Off RAY
To power off RAY: To power off RAY: To power off RAY: To power off RAY:
►
1 Long press the ON/OFF button
found.. RAY says Power Menu.
2 Place your finger somewhere in the middle of the screen and slide it
the number 2.
3 You can power RAY back up with a long press of the ON/OFF button. Hold the
ON/OFF button
ready for you to start using it.
RAY plays a special sound.
When RAY say Power Down, lift your finger off the screen.
until you feel RAY
22
Getting Started with RAY
shown in Error! Reference source not
vibrate. RAY says Home Menu when it is
towards