Getting Started With Ray; Preparing To Use Ray; Charging Ray - ray VISION User Manual

RAY User Guide

Getting Started with RAY

This chapter describes how to get started using RAY, make your first call and turn
RAY off. This chapter also describes how to access the RAY Wizard which provides
various lessons and practice sessions describing how to use RAY.

Preparing to Use RAY

Charging RAY

Charging Charging Charging
To charge RAY To charge
To charge To charge
►
1 Plug the provided AC power adapter into the charger input port on the bottom
of RAY, as shown in
2 Plug the AC power charger into a standard power outlet (mains socket).
Charging starts immediately.
3 If this is the first time that you are using RAY, then let it charge for a few
hours.
Note
When RAY's battery level is low, it says Low Battery. You may refer to
page 65 for a description of how to check the battery charge level.
RAY RAY RAY
RAY's 's 's 's internal battery internal battery: : : :
RAY RAY internal battery internal battery
Error! Reference source not found.
12
Getting Started with RAY
2
.