ray VISION User Manual page 35

RAY User Guide
2 Imagine the place you touched the screen is the number 5 on a regular 12-
digit numeric keyboard. Clockwise round the area where you placed your
finger (which becomes the number 5), there are 8 numbers starting from 1 on
the upper left corner, 2 in the upwards direction, 3, 6, 9, 8, 7 and 4.
3 Slide your finger a little on the screen in any of the 8 directions. Each direction
represents a RAY activity. RAY reads out the name of the activity according to
the direction of your finger movement. For example, the operations available
for a contact management includes the following:
4 – Previous Screen: Returns
1 – Record a note: Record the name of the person or a note instead of
getting a vocal reading of the name itself.
2 – Call the contact:
3 – Information: get full information about the contact including name,
numbers and recording attached to it.
6 – Favorite: Add or remove the contact from the list of favorite contacts
7 – Edit:
8 – Send SMS to contact:
9 – Delete the contact:
4 To select the activity that RAY reads out, simply lift your finger. RAY then tells
you the name of the activity that is open so that you know what to do next.
If you slide your finger too much and go off the screen, you will hear a
cancellation sound and the current operation is cancelled.
Tip
You can go back to the previous screen from a management screen by
sliding your finger from the center of the screen to the number 4.
Tip
After you hold your finger on a Management screen for three seconds, RAY
reads out the name of the screen.
Tip
After you put your finger on a Management screen, RAY reads out the name
of the currently selected option in the Management screen. Lift your finger to
select it.
35
RAY Interface Basics