Entering A Number - ray VISION User Manual

RAY User Guide

Entering a Number

Entering a Number
Entering a Number Entering a Number
The following describes how to enter a number for any reason. For example, to
dial a phone number or as a DTMF (meaning to enter numbers in the middle of a
call if requested to do so by the callee).
Note
Many of the numbers in the Dialer have additional functionality besides
enabling you to type a number, as described on page 21.
To enter a number:
1 When a numeric keypad is open (for example, as described on the previous
page), place your finger somewhere near the center of the screen. Wherever
you place your finger becomes the center of the
meaning the number 5.
Figure 8: Entering a Number
2 RAY then says 5. To select the number 5, simply lift your finger off the screen.
To select a different digit, slide your finger, without lifting it, in the direction of
that number until
3 When RAY says the intended number, lift your finger to select it.
For example:
To select the number 2, place your finger on the screen and then slide it
slightly upwards.
To select the number 6, place your finger on the screen and then slide it
to the right.
RAY says the intended number.
20
Getting Started with RAY
12-key numeric keypad,