Assembly - Bissell POWERFORCE COMPACT 1520 SERIES User Manual

Assembly

This user's guide has been designed to help you
get the utmost satisfaction from your vacuum.
You'll find assembly and operating instructions,
safety precautions, as well as maintenance and
troubleshooting instructions. Please read this
guide thoroughly before assembling your
vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this user's guide will greatly enhance
your ability to get the best performance from
your vacuum for many years.
1. Position the handle so the lower tab is
facing the back of the vacuum.
2. Insert the handle into the base and push
until you hear it lock into place.
3. Wrap power cord around cord wraps and
place attachments in their correct holders.
Handle position
Press the handle recline pedal with your foot to
place your vacuum in one of three positions.
1. Upright - For storage and transporting.
2. Normal Cleaning - Press handle release pedal
once. Use for most household floor cleaning
tasks.
3. Low Cleaning - With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture, such
as tables, chairs, or beds.
WARNING
Do not operate vacuum with damp or wet filters
or without all filters in place first.
ATTENTION
The floor brush will continue to rotate while using
your vacuum for above floor cleaning. To prevent
carpet damage, do not lean on the vacuum or let
the power foot tilt forward.
1.
3.
www.BISSELL.com
2.
5