Bissell POWERFORCE COMPACT 1520 SERIES User Manual page 7

Operations
Using your cleaner
1. For first time use, remove the plastic plug
guard and dispose.
2. Rotate the Quick Release cord wrap towards
floor and slip power cord from upper and lower
cord wraps.
3. Connect power cord plug to a
polarized outlet.
4. To keep the power cord out of your
way while cleaning, place it in the
cord hook by the top of the vacuum.
Power Switch pedal
The red power switch pedal is located on the
back of the cleaner, under the cord wraps.
1. Step on the power switch to turn the
unit "On". The rotating floor brush and suction
will start.
2. Step on the pedal again to turn the
vacuum "Off".
Power
Switch
Pedal
CAUTION
Before using your vacuum, make sure that all
filters are in place. Do not operate your vacuum
without these filters.
ATTENTION
Some berber carpets have a tendency to fuzz with
wear. Repeated strokes in the same area may
enhance this condition.
WARNING
The rotating floor brush continues to rotate while tools
are in use. To reduce the risk of injury from moving parts,
always move the cleaner with the carrying handle at the
front of the cleaner. Always place vacuum cleaner on floor
with handle in upright position when using tools. Never
place your fingers under the cleaner when it is running.
Never place powerfoot on furniture or uneven surfaces. Do
not place vacuum cleaner close enough to objects to pull
them into rotating brush.
Cord
Hook
Upper Quick
Release
Cord Wrap
Lower Quick
Release
Cord Wrap
www.BISSELL.com
7