Date And Time; Save All Users Data; Load All Users Data; Initialize - Panasonic DLP PT-D6000 Functional Instructions

DATE AND TIME

You can set the time zone and correct the time and date of
internal clock.
TIME ZONE Select the current located time zone.
Adjust YEAR, MONTH, DAY, HOUR
and MINUTE by pressing I H, then
ADJUST CLOCK
select APPLY and press the ENTER
button.

SAVE ALL USERS DATA

You can save various setting values as a backup to the internal
memory of the projector.
1. Press the ENTER button.
The SECURITY PASSWORD will be asked to perform.
2. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See "SECURITY PASSWORD" on page 35.
3. Press I to select OK, then press the ENTER button.
NOTE:
• E-mail settings of NETWORK that is controlled by web
browser, and the image data for LOGO1 in BACK COLOR
and STARTUP LOGO will not be saved.

LOAD ALL USERS DATA

You can load the saved data in SAVE ALL USER DATA.
1. Press the ENTER button.
The SECURITY PASSWORD will be asked to perform.
2. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See "SECURITY PASSWORD" on page 35.
3. Press I to select OK, then press the ENTER button.
4. The projector returns to the standby mode to reflect the
saved data.
PROJECTOR SETUP menu

INITIALIZE

You can reset the settings to the factory defaults by the
selected mode.
1. Select the required mode to initialise.
2. Press the ENTER button.
3. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See "SECURITY PASSWORD" on page 35.
4. Press I to select OK, then press the ENTER button.
When initialising by ALL USER DATA, switch off the power
and restart the projector.
All setting values including registered
signals in SIGNAL LIST, e-mail
settings of NETWORK, and registered
ALL USER DATA
image data for LOGO1 in BACK
COLOR and STARTUP LOGO will
return to factory settings.
All registered signal settings in
ENTRY SIGNAL SIGNAL LIST will return to factory
settings.
All setting values in NETWORK
NETWORK/E-MAIL including e-mail settings will return to
factory settings.
The registered image data for LOGO1
LOGO IMAGE in BACK COLOR and STARTUP
LOGO will return to factory settings.

SERVICE PASSWORD

SERVICE PASSWORD is for a service person. Input the
password with the numeric buttons of the remote control and
press the ENTER button to confirm the entry.
E
NGLISH - 31