Display Option Menu; Color Matching; Color Correction; Contrast Mode - Panasonic DLP PT-D6000 Functional Instructions

DISPLAY OPTION menu

Remote control
See "Navigating through the menu" on page 15.
See "Main menu and Sub-menu" on page 12.

COLOR MATCHING

When multiple projectors are used simultaneously, you can
adjust the difference of the colours. Press I H to cycle
through the options.
OFF Deactive.
Adjusting RGB gain of RED, GREEN and
BLUE, and also GAIN of WHITE. Press
3 COLORS I H to change the value and switch ON/
OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
Adjusting RGB gain of RED, GREEN,
BLUE, CYAN, MAGENTA, YELLOW and
7 COLORS WHITE. Press I H to change the value and
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
Adjusting 7 colours based on measured
values using colorimeter. Input measured
result in MEASURED DATA, and adjust in
TARGET DATA. Press I H to change the
MEASURED value and switch ON/OFF the AUTO TEST
PATTERN.
PICTURE MODE in PICTURE menu
need to be set to DYNAMIC for using
colorimeter.
NOTE:
• If the TARGET DATA is outside the colour range of the
projector, the colours will not be projected correctly.
• When each colour option is selected while AUTO TEST
PATTERN is activated, its one colour pattern will be displayed.
• Adjusting red gain of red colour changes its luminance, and
likewise blue gain of blue and green gain of green.
• COLOR MATCHING adjustment should be carried out by a
person who is familiar with the projector or by a service person
because a high level of skill is required to make successful
adjustment.
• Press the DEFAULT button to restore the factory default
settings.
• AI, COLOR CORRECTION and COLOR TEMPERATURE are
not available with COLOR MATCHING.

COLOR CORRECTION

You can adjust 6 colours and register the result for each of 4
types of signals, VIDEO, S-VIDEO, RGB and YP
OFF Deactive
Adjust 6 colours, RED, GREEN,
USER BLUE, CYAN, MAGENTA and
YELLOW.

CONTRAST MODE

You can switch the contrast mode for operating environment.
NORMAL Maximum brightness
HIGH Maximum contrast

SCREEN SETTING

SCREEN FORMAT

Select the required screen format by pressing I H. The
SCREEN FORMAT setting will affect on the ASPECT
setting. See "ASPECT" on page 18.
PT-DZ6710E/PT-DZ6700E 16:10
PT-DW6300E
16:10
PT-D6000E
4:3
*1. SCREEN POSITION is not available.

SCREEN POSITION

You can change the displaying position of the projecting
area. Press I H to adjust the value.
Setting range:
16:10
PT-DZ6710E/PT-DZ6700E
16:9
4:3
Setting range:
PT-DW6300E 16:10
16:9
Setting range:
PT-D6000E 4:3
16:9

AUTO SIGNAL

You can turn ON/OFF automatically detecting system of the
AUTO SETUP feature.
Only when the AUTO SETUP button is
OFF pressed, the projected image position
will be adjusted.
When the projector detects a
ON COMPUTER or DVI signal, adjust the
projected image position automatically.
P /YC C
B R B
*1
H 16:9 H 4:3
*1
H 16:9
*1
H 16:9
Not available.
-60 to +60
-160 to +160
Not available.
-40 to +40
Not available.
-96 to +96
E
NGLISH - 25
.
R