Projector Control Window; Change Password; Accessing With The Web Browser - Panasonic DLP PT-D6000 Functional Instructions

Accessing with the web browser

Projector Control Window

1. Activate the web browser of the computer.
2. Enter the IP ADDRESS set by the projector into the URL
input field of the web browser.
See "NETWORK STATUS" on page 37.
3. Enter your user name and password.
The factory default settings are "user1" (user privileges) or
"admin" (administrator privileges) for the user name and
panasonic (lowercase) for the password.
4. Click OK and display the Projector Control Window.
5. Click the required item button on the left.
NOTE:
• Avoid activating two or more web browser
simultaneously to work out setting or control actions.
• Change the password first of all.
• Administrator privileges enable the use of all functions.
User privileges enable the use of only Projector
status, Error information, Network status, Basic
control, and Change password.
• If the password is incorrectly entered three times in a
row, the lock is set for several minutes.
Technical Information

Change password

Administrator mode
1. Select Administrator to change and click NEXT.
2. Enter User name and Password.
Administrator account
Current setting
Enter the current user name.
User name
Enter the current password for the
Password
user name.
New setting
Enter new user name.
User name
Enter new password.
Password
Enter the new password again.
Password(Retype)
E
NGLISH - 39