Features • Measure the thickness of non-magnetic coatings on magnetic or non-magnetic metal substrates • Choice of remote probe; F probe measures the thickness of non- magnetic coatings on magnetic metal substrates; N probe measures the thickness of non-magnetic coatings on non-magnetic metal substrates •...
Instrument Description Sensor Zero button Power button LCD screen Plus button µm/mil button Minus button Battery compartment F Probe Description Measures the thickness of non-magnetic materials (example: paint, plastic, porcelain enamel, copper, zinc, aluminum, chrome, ect.) on magnetic materials (example: iron, nickel, ect.). Common uses include measuring thickness of galvanizing layer, lacquer layer, porcelain layer, phosphide layer, copper tile, aluminum tile, some alloy tile, and paper.
Operating Instructions Measuring Procedure Plug in the F-probe or NF-probe and place it away from any substrate or other metal materials Press the power button to turn on the meter and to perform the auto calibration, which takes 3 seconds The meter will recognize the probe and display F or NF on the LCD screen Select the measurement unit by pressing µm/mil button, which...
Blue - 100/80/30/5 Pantone 534 Blue Yellow - 0/27/100/0 Pantone 123 Yellow For service (repairs or calibration) on this or any other REED product Red - 10/100/100/5 or information on other REED products, contact REED Instruments at Pantone 485 Red...
Need help?
Do you have a question about the CM-8822 and is the answer not in the manual?
Questions and answers