About Your Projector; Remote Control - Panasonic PT-F100E Operating Instructions Manual

Lcd projector for commercial use
Hide thumbs Also See for PT-F100E:
Table of Contents

Advertisement

About Your Projector

Remote control

POWER button
While the MAIN POWER is on,
switch between stand-by mode
and projection mode.
(page 22)
Project a laser pointer.
(page 26)
Display the MAIN MENU.
(page 29)
Navigate through the
menus with FGIH, and
activate the menu item with
ENTER. (page 29)
Capture the projected image
as a frozen picture. (page 27)
Reset some of the settings to
the factory default settings.
(page 27)
MULTI-LIVE is only
for PT-F100NTE.
See CD-ROM
contents.
Control to change the
scale by means of digital
zoom. (page 28)
Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram
indicated inside.
Top view
Remote control signal and Laser pointer
beam emitters. (page 25)
NOTE:
• Do not drop the Remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the Remote control.
• Do not attempt to modify or disassemble the Remote control. Contact an Authorised Service Centre for repairs.
• Do not keep pressing the Remote control buttons as this may shorten battery life.
• Do not point the laser in other people's eyes or stare into beam.
• See "Remote control operation" on page 25.
Control to adjust the
volume of the speakers.
(page 28)
Attaching a hand strap
You can attach a favourite strap
on to the Remote control.
Remote control indicator
If you press any button except the
LASER button, the Remote control
indicator will flash. If you press the
LASER button, it will lit.
Automatically adjust the
setting of DOT CLOCK,
CLOCK PHASE and SIGNAL
SEARCH for the projected
image of COMPUTER signal.
(page 25)
INPUT SELECT buttons
Switch the required input
signal button to select.
NETWORK button is
only for PT-F100NTE.
See CD-ROM contents.
PAGE buttons are only
for PT-F100NTE.
See CD-ROM contents.
Return to the previous menu.
(page 29)
Turn off the projection
temporarily.
Display the frozen image
while the display of
subsequent images
continues. (page 27)
COMPUTER SEARCH
button is only for
PT-F100NTE.
See CD-ROM contents.
Remote control
indicator
E
NGLISH - 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-f100nte

Table of Contents