Connections; Before Connection To The Projector; Connecting With Computers - Panasonic PT-F100E Operating Instructions Manual

Connections

Before connection to the projector

Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase
correction is effective.
Confirm the type of video signals. See "List of compatible signals" on page 46.

Connecting with computers

LAN cable
(Commercial)
Computer for
controlling
NOTE:
• When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.
• See CD-ROM contents for the LAN network connection.
LAN terminal
NOTE:
• Do not touch the metal parts of the LAN terminal. Failure to observe this may cause malfunction by static electricity.
E
NGLISH - 20
Computers
RGB signal cable
(Commercial)
ACT lamp (Green)
Flashes when transmit data.
LINK lamp (Yellow)
Illuminates when a LAN cable is connected.
Audio system
Monitor