Opening The Detector - Honeywell FS24X Installation Manual And Operating Manual

2.2

Opening the Detector

It is necessary to remove the Detector Module puck from the enclosure to access the field connections.
CAUTION: Disconnect power before
1. Loosen the set screw on the enclosure lid
(see Figure 2-6).
2. Turn counterclockwise (CCW) to unscrew
the enclosure lid (see Figure 2-7).
3. Loosen the three captive screws on the
Detector Module puck (see Figure 2-8).
Honeywell
unscrewing the Housing Lid.
Installation Guide and Operating Manual
Figure 2-6
Figure 2-7
Figure 2-8
10