Honeywell FS24X Installation Manual And Operating Manual page 9

Fsx fire and flame detectors
Hide thumbs Also See for FS24X:
Table of Contents

Advertisement

SM4 Swivel Mount
Mounting Instructions
Note the following Precautions:
1.
D o not touch
U
Detector electro-optical electronics module (puck). If touched
accidentally, they should be cleaned following the instructions
listed below (see Figure 2-5).
2. When cleaning the Detector's sensor windows on the puck, it
is best to use Alcohol or IPA sparingly and a cotton swab.
3. There are no serviceable parts inside the Detector puck. If the
puck is opened up or tampered with, all warranties are voided.
CAUTION:
Follow static protection procedures while handling the connectors and the wiring
of the Module puck to the Detector.
Honeywell
Figure 2-2
(continued)
the sensors' windows on the front of the
U
Installation Guide and Operating Manual
Figure 2-3
Detector (front view)
Figure 2-4
Use a wrist strap connected to earth ground.
FSX Detector Module "puck"
Figure 2-5
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents