Setting The Date And Time - Gigaset E630hx User Manual

Getting started
A handset can be registered to up to four base stations.
Change of base:
De-registering the
handset (depending
on the base):

Setting the date and time

Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
Date and time are set using the base. The date and time can also be set on an
IP-compatible base via a time server on the network.
If the base permits it, you can set the date and time manually using the handset.
¤
Press the display key Time
or, if the date and time have already been set:
¤
. . . use
OK
The active cursor position flashes
. . . switch between cursor positions with
Enter date:
¤
. . . using enter the day, month and year in 8-digit format,
e. g.
Enter time:
¤
. . . using enter hours and minutes in 4-digit format,
e. g.
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the End call key
The telephone is now ready for use.
10
¤
Select Base OK
( = selected)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
¤
De-register Handset
. . . use to select another handset if required
system PIN if required
If the handset is still registered to other bases, it switches to the base
with the best reception (Best Base).
to select Settings
. . . change cursor position with
for 07:15.
Availability and operation of the functions
may differ on your telephone.
. . . use to select base or Best Base
OK . . . the handset being used is selected
OK . . . Confirm de-registration with Yes
OK Date/Time
for 15/08/2016.
Select
OK . . . enter
Calls Time
Date/Time
Date:
15/08/2016
Time:
00:00
Back Save