Changing The Display Language; Registering The Handset; Setting The Date And Time - Gigaset R650 H PRO Manual

Changing the display language

Change the display language if you do not understand the language currently set.
¤

Registering the handset

The registration process depends on the base. You must initiate
registration on the handset and on the base. Both must be car-
ried out within 60 secs.
¤
On the base: Press and hold (min. 3 secs) the Registration/
paging key.
¤
On the handset, press the display key Register.
Or:
OK
set OK
Display shows: Searching for a base in registration mode. The
connection to the base will be established; this may take some
time.
¤
Enter the system PIN if required (factory setting: 0000). OK
When registering, the display screen shows: Handset is registering
After registering successfully, the display screen shows: Handset registered
Your handset can be registered on up to four bases. To see how to use your handset with
multiple bases and de-register a handset, refer to the user guide for the base.
For information on registering to a DECT IP multicell system, consult the relevant user
guide at

Setting the date and time

Set the date/time so that the correct date and time can be assigned to incoming calls, and so that
you can use the alarm.
¤
Press the display key Time.
Or:
OK Date/Time OK
¤
Setting the date and time:
¤
Save
Your phone is now ready for use.
Select language
Registration OK Register Hand-
wiki.gigasetpro.com
Select ( = selected)
Getting started
Registration
Please register
handset
Register
9