Gigaset E630hx User Manual page 48

System
Activating/deactivating music on hold
(depending on the base)
¤
. . . use
hold Change (
Setting the IP address of the base station in LAN
(only on a Gigaset GO-Box 100 or other Gigaset-IP base)
Your base station is connected to a router or a PC.
An IP address is required in order for the LAN to "recognise" your phone. The IP address can be
assigned to the phone automatically (by the router) or manually.
•
If the address is assigned dynamically the router's DHCP server automatically assigns an IP
address to the phone. The IP address can be changed according to router settings.
•
In the case of manual/static assignment, you assign a static IP address to the phone. This may
be necessary depending on your network configuration (e.g. if your phone is connected
directly to a PC).
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user guide for your router.
¤
. . . use
Network OK
OK . . . then
Address type:
IP address:
Subnet mask:
Standard-Gateway:
46
to select Settings
= on)
to select Settings
. . . use to enter the system PIN (if the system PIN differs from 0000)
¤
IP Address Type: . . . use
With IP Address Type Dynamic: The following fields show the
current settings that the phone obtained from the router. These
settings cannot be changed.
With IP Address Type Static:
fields.
¤
IP Address
current setting)
¤
Subnet Mask
write current setting)
¤
Default Gateway
standard gateway
The local network is connected to the Internet via the standard
gateway. This is generally your router.
Availability and operation of the functions
may differ on your telephone.
OK Audio Settings
OK System
to select Static or Dynamic
Enter settings for the following
. . . use to enter the IP address (overwrite
. . . use to enter the subnet mask (over-
. . . use to enter the IP address of the
OK Music on
OK Local