Table of Contents
Advertisement
NAVMAN
GPS 4100
4-5 Option 3 : Using the Self-Adhesive Mounting Pad
1
2
4-6 Option 4 : Using the Lanyard
4-7 Option 5 : Using the Armband
Use an alcohol swab to clean the recess on the suction mount cradle.
Peal the backing from the self-adhesive mounting pad and press it fi rmly into the recess on the suction mount
cradle.
Push one end of the lanyard through the lanyard hole in the case of the receiver. Loop the end of the lanyard
through the other side and pull it tight. Ensure the Bluetooth GPS receiver's top is positioned to "see" a clear view
of the sky to enable GPS satellite reception.
Thread the armband through the slots on either side of the back of the Bluetooth GPS receiver, as illustrated
below. Ensure the Bluetooth GPS receiver's top is positioned to ensure a clear view of the sky to enable GPS
satellite reception.
10
Advertisement
Table of Contents
