Power Off Rule (Models For Europe) - Kyocera ECOSYS P5021cdn Operation Manual

Installing and Setting up the Machine > Energy Saver function
2
3

Power Off Rule (models for Europe)

The Power Off Rule is used to stop the power from automatically turning off.
The default preset time is 3 days.
For more information on Power Off Rule settings, refer to the following:
Power Off Rule (models for Europe) (page 6-21)
3
Enter the administrator password and select the [OK] key.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is set as shown below.
ECOSYS P5021cdn/ECOSYS P5021cdw
ECOSYS P5026cdn/ECOSYS P5026cdw
4
[▲] [] key > [Sleep Level] > [OK] key
Select the Sleep level.
[▲] [] key > [Quick Recovery] or [Energy Saver] > [OK] key
When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for
each function.
Set the Sleep rule.
1
[▲] [] key > [Network] or [Card Reader] > [OK] key
[Card Reader] is displayed when the optional Card Authentication Kit is activated.
2
[▲] [] key > [Off] or [On] > [OK] key
Model Name
2-30
Administrator Password
2100
2600