Enabling User Login Administration - Kyocera ECOSYS P5021cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Enabling User Login Administration

NOTE
This functions appears when the Card Authentication Kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 9-2)
1
2
Display the screen.
1
[Menu] key > [▲] [▼] key > [User/Job Account] > [►] key
2
Enter the administrator ID and select the [OK] key.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is set as shown below.
ECOSYS P5021cdn/ECOSYS P5021cdw
ECOSYS P5026cdn/ECOSYS P5026cdw
3
Enter the administrator password and select the [OK] key.
NOTE
Enter a password consisting of between 0 (no settings) and 16 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is set as shown below.
ECOSYS P5021cdn/ECOSYS P5021cdw
ECOSYS P5026cdn/ECOSYS P5026cdw
4
[▲] [▼] key > [User Login Set.] > [►] key
Configure the settings.
[▲] [▼] key > [Login Type] > [OK] key > [▲] [▼] key > [Netwk Authentic.] > [OK] key
NOTE
Select [Off] to disable user login administration.
Model Name
Model Name
7-3
Administrator ID
2100
2600
Administrator Password
2100
2600