Connecting Cables; Connecting Lan Cable - Kyocera ECOSYS P5021cdn Operation Manual
Hide thumbs
Also See for ECOSYS P5021cdn:
- Service manual (217 pages) ,
- Setup manual (19 pages) ,
- Service bulletin (5 pages)
Table of Contents
Advertisement
Installing and Setting up the Machine > Connecting Cables
Connecting Cables
Connecting LAN Cable
IMPORTANT
Make sure that the power to the machine is turned off.
Power Off (page 2-9)
1
2
Connect the cable to the machine.
1
Connect the LAN cable to the network interface connector.
2
Connect the other end of the cable to the hub or the PC.
Power on the machine and configure the network.
Network Setup (page 2-17)
2-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
