Ram Disk Mode - Kyocera ECOSYS P5021cdn Operation Manual

Setup and Registration (System Menu) > System Menu
Buzzer
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Buzzer] > [►] key
Set options for buzzer sound during the machine operations.
Item
Key Confirmation
Job End
Ready
Error

RAM Disk Mode

[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [RAM Disk Mode] > [OK] key
Item
RAM Disk Mode
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
SD Card
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [SD Card] > [►] key
Format an SD/SDHC memory card.
A new SD card must be formatted before it can be used in the machine.
IMPORTANT
Formatting will destroy any existing data on a storage device including a used SD card.
Emit a sound when a key is selected on the operation panel.
Value: On, Off
Emit a sound when a print job is normally completed.
Value: On, Off
Emit a sound when the warm-up is completed.
Value: On, Off
Emit a sound when errors occur.
Value: On, Off
A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: On, Off
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
6-18
Description
Description