Connecting A Dvd Player/Recorder - Yamaha YSP 900 - Digital Sound Projector Five CH Speaker Owner's Manual

Digital sound projector
Hide thumbs Also See for YSP 900 - Digital Sound Projector Five CH Speaker:
Table of Contents

Advertisement

CONNECTIONS

Connecting a DVD player/recorder

To connect a DVD player/recorder, connect the coaxial digital output jack on your DVD player to the coaxial digital
input jack (DVD COAXIAL) on this unit.
If there is no coaxial digital output jack on your DVD player/recorder, use them with optical digital connection.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 14).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead.
Video signal to a TV
Analog audio
output
R
VCR
AUDIO INPUT
Cables used for connections
Digital audio pin cable (supplied)
(Orange)
16
En
DVD/VCR combo
player/recorder
Coaxial digital
output
L
TV/STB
SUBWOOFER
VIDEO
OUT
(Orange)
DVD player/recorder
Coaxial digital
output
TV/STB
AUX
OPTICAL
COAXIAL
DIGITAL INPUT
Audio pin cable
(White)
(Red)
Video signal to a TV
Rear panel of this unit
DVD
(White)
(Red)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ysp 900

Table of Contents