Replacing The Auxiliary Light Bulb - Yamaha 2007 XVS1300AW Owner's Manual

3. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1. License plate light bulb socket
4. Remove the defective bulb by pull-
ing it out from the socket.
1. License plate light bulb
5. Insert a new bulb into the socket.
PERIODIC MAINTENANCE AND MINOR REPAIR
6. Install the socket (together with the
bulb) by pushing it in and turning it
clockwise until it stops.
7. Place the license plate light unit in
the original position, and then in-
stall the license plate light cover by
installing the bolts.
6-32
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
page 6-29.)
2. Remove the auxiliary light socket
(together with the coupler) by turn-
ing the socket counterclockwise.
1. Auxiliary light bulb socket
3. Remove the defective bulb by pull-
ing it out.
EAU42870
6