PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
1. Screw
6
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
EAU24131
Replacing a turn signal light
bulb
1. Remove the turn signal lens by re-
moving the screws.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
ECA10680
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-31
EAU24210
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the bolts.
1. License plate light cover
2. Bolt
2. Pull the license plate light unit up
as shown.
ECA10680
1. License plate light unit
EAU42482