Plan The Icm Installation - KVH Industries tracphone v3ip Installation Manual

3

Plan the ICM Installation

Before you begin, consider the following
installation guidelines for the ICM.
• Select a mounting location in a dry, well-
ventilated area belowdecks away from any
heat sources or salt spray.
• Be sure the front panel will be easily
accessible to the user.
• Leave enough room at the rear panel to
accommodate the connecting cables.
• To use the supplied power/data cable, the
ICM must be located within 100 ft (30 m) of
the antenna. However, you can order a 150 ft
(45 m) cable if a longer cable run is necessary
(KVH part no. 32-1031-0150).
• Be sure the location provides adequate Wi-Fi
reception. Do not install it in an area
surrounded by metal or near any electrical
devices that emit RF noise.
6
Figure 5: ICM Dimensions
Strain-Relief Bracket
Top View
19.00"
(48.26 cm)
Side View
5.99"
(15.22 cm)
Front View
16.75"
(42.55 cm)
18.31"
(46.51 cm)
16.31"
(41.43 cm)
11.17"
(28.37 cm)
3.49"
(8.85 cm)
4 x ø.25"
(0.64 cm)
2.25"
(5.72 cm)
0.62"
(1.57 cm)