KVH Industries tracphone v3ip Installation Manual page 41

B Continued
Windows 8
1. Turn on the computer.
2. In Control Panel, double-click Network and
Sharing Center. To open the Control Panel, go
to the desktop, select Settings from the Charms
bar, then select Control Panel.
3. In Network and Sharing Center, double-
click the Ethernet link for the Ethernet
connection you are using.
4. In the Ethernet Status dialog box, click
Properties. If this screen doesn't appear, just
skip to Step 5.
5. In the Ethernet Properties dialog box, on
the Networking tab, select Internet
Protocol Version 4, and then click
Properties.
6. In the Internet Protocol Properties dialog
box, select Obtain an IP address
automatically and Obtain DNS server
address automatically (see Figure 78).
Then click OK.
7. In the Ethernet Properties dialog box, click
Close.
40
Configuring Computers for DHCP
Figure 78: Windows 8 - Internet Protocol Properties
Appendix