Table Of Contents - KVH Industries tracphone v3ip Installation Manual

TracPhone V3-IP in 24" (60 cm) Dome Installation Guide
mini-VSAT Broadband
This guide explains how to install the TracPhone V3-IP mini-VSAT Broadband satellite
communications system. Operation instructions are provided in the Quick Start Guide.
Installation Steps
1. Inspect Parts and Get Tools ................. 3
2. Plan the Antenna Installation .............. 4
3. Plan the ICM Installation...................... 6
4. Prepare the ICM..................................... 7
5. Mount the ICM ...................................... 8
6. Prepare the Antenna Site...................... 9
7. Remove the Shipping Restraints ....... 10
8. Prepare the Antenna Cables .............. 11
9. Wire the Antenna ................................ 13
10. Mount the Antenna ............................. 14
11. Wire the ICM........................................ 15
CAUTION - RF Radiation Hazard
The antenna transmits radio frequency (RF)
energy that is potentially harmful.
Whenever the system is powered on, make
sure everyone stays more than 32 ft (10 m)
away from the antenna within its 7.5-75°
elevation range. No hazard exists directly
above the antenna and anywhere below the
antenna's mounting plane.
Who Should Install the System?
To ensure a safe and effective installation, only a KVH-certified technician should install the
TracPhone system. To find a technician near you, visit www.kvh.com/wheretogetservice.
Technical Support
North/South America, Australia:
Phone: 1 866 701-7103 (U.S. only)
Phone: +1 401 851-3806
Email: mvbsupport@kvh.com
KVH, TracPhone, CommBox, IP-MobileCast, and the unique light-colored dome with dark contrasting baseplate are trademarks, and
mini-VSAT Broadband is a service mark, of KVH Industries, Inc. All other trademarks are property of their respective companies.
The information in this document is subject to change without notice. No company shall be liable for errors contained herein.
© 2013-2016 KVH Industries, Inc., All rights reserved. 54-0950 Rev. D
System with Integrated CommBox
SM
12. Connect Power......................................18
13. Turn On the System .............................20
14. Update the System Software...............21
15. Customize the Web Interface..............22
16. Set Up No-Transmit Zones .................23
17. Set Up Tracking Avoidance Zones ....24
18. Test the System .....................................25
19. Configure the Network .......................26
20. Connect Voice Line Equipment..........33
21. Educate the Customer..........................34
Europe, Middle East, Asia, Africa:
Phone: +45 45 160 180
Email: mvbsupport@kvh.com
75°
Radiation Radiation
Hazard
7.5°
Modem
TM
75°
Hazard
7.5°
1