Customize The Web Interface - KVH Industries tracphone v3ip Installation Manual

15

Customize the Web Interface

Follow these steps to customize the web interface
for the customer's use.
Set the Administrator Password
The user must be logged in as an administrator to
make changes to the system's configuration.
Follow these steps to change the administrator
password to something unique.
a. At the TracPhone V3-IP web interface, click
the Settings tab. Then click Account.
b. In Security, click Edit.
c. For the current password, enter the default
password: "password" (see Figure 34).
d. Enter and then re-enter the new password.
Then click Save Settings.
Enter the Vessel Name
The vessel name is displayed on the home page
and in all support communications. Follow these
steps to enter the correct vessel name.
a. At the TracPhone V3-IP web interface, click
the Settings tab. Then click Account.
b. In Vessel Name, click Edit.
c. Enter the vessel name (see Figure 35). Then
click Save Settings.
Assign the Phone Line Name
The phone line name is displayed on the home
page and in all support communications. Follow
these steps to assign a name (i.e., location) to the
phone line.
a. At the TracPhone V3-IP web interface, click
the Settings tab. Then click Other.
b. In Phone Line Name, click Edit.
c. Enter a name for Line 1 (see Figure 36). Then
click Save.
22
Figure 34: Setting the Administrator Password
Figure 35: Entering the Vessel Name
Figure 36: Assigning the Phone Line Name