Mercedes-Benz B-Class Electric Drive Operator's Manual page 190

Menus and submenus
188
Drive system switched on when the vehi-
cle is stationary or in overrun mode
The drive system is switched on while the
vehicle is stationary. Alternatively, the drive
system is switched on while the vehicle is in
transmission position D
The arrows indicating energy flow are not
shown.
Drive system switched off and high-volt-
age battery being charged
The drive system is switched off. The charging
cable is connected and the high-voltage bat-
tery is being charged.
The arrows for the energy flow are shown in
green.
Normal driving
The drive system powers the vehicle.
The arrows for the energy flow are shown in
white.
Boost driving mode
If high power is required, the boost mode
takes effect.
The arrows for the energy flow are shown in
red.
+ or N.
Energy recuperation mode
The kinetic energy of the vehicle is converted
into electrical energy. The Recuperative
Brake System is active. The high-voltage bat-
tery is being charged.
The arrows for the energy flow are shown in
green.
Displaying the range and current con-
sumption
X
X
Press the = or ; button on the steer-
ing wheel to select the Trip
Press 9 or : to select the display
with approximate range and current fuel
consumption.
The approximate range depends on the
condition of charge of the high-voltage bat-
tery and your current driving style. If the
high-voltage battery condition of charge is
menu.